TL;DR
Get decor and gifts delivered free with Prime
- Fast, free delivery on millions of items
- Prime Video, Amazon Music and more included
- Member-only deals all year
A Hunker report describes a YouTube DIY from @Sculpd that reshapes air-dry clay into a wall-mounted toilet paper holder, then finishes it with paint. The project offers a customizable alternative to a conventional holder, but the report cautions that air-dry clay can be brittle and that the piece needs a secure attachment.
A DIY tutorial featured in Hunker shows how creator @Sculpd turns air-dry clay into a colorful, wall-mounted toilet paper holder. The project replaces a standard bathroom accessory with a handmade design, while the report warns that clay can be brittle and that the holder must be shaped and mounted securely.
The tutorial’s design uses a long, rounded piece of clay shaped into a loose, cursive capital L. A loop at the top provides a hanging point, while the longer lower arm supports the cardboard tube inside a toilet paper roll. Its open end lets a user slide off an empty roll and put on a new one without removing the holder from the wall.
Before the clay dries, the report recommends checking the arm against an empty cardboard tube to make sure it can pass through the center. Fingerprints can be smoothed with a lightly damp fingertip or sponge. The piece should then be left to dry fully; Hunker recommends allowing 72 hours before painting, rather than rushing the process and risking cracks.
After drying, the holder can be painted and given a compatible clear protective finish, such as Mod Podge, according to the report. The featured version uses bright pink paint with blue splatters, but the article suggests other colors and patterns. It lists air-dry clay, a work mat, a clay tool or craft knife, a little water, paint and a suitable clear coat among the materials.
A Small Fixture Becomes a DIY Project
The project turns a routine bathroom fixture into a customizable decor piece and offers an alternative for people who want to move a roll from the toilet tank or replace a conventional holder. Its appeal is that the shape and finish can be adapted to a bathroom’s colors, from a bold painted design to a more understated look.
That creative freedom comes with practical limits. The holder must carry a roll while hanging from a wall, and the source specifically cautions that air-dry clay can be brittle. A shape that looks striking may not hold up if it is too thin, incompletely dried or poorly attached. The project therefore depends on both the decorative finish and careful construction.
The article also presents different mounting options, from a wall hook to a heavy-duty removable hook. The choice affects how the holder is supported and whether it can be removed without wall damage. Hunker advises checking that the holder sits securely before adding a roll and placing it within easy reach of the toilet.
Popular right now
Ninja Flip Toaster Oven and Air Fryer, 8-in-1, Stainless Steel, SP151
Hisense 75U6SF Pro 75-Inch U6 Pro Mini-LED 4K UHD Smart Fire TV
Sony WH-1000XM4 Wireless Noise-Canceling Headphones, Silver
As an affiliate, we earn on qualifying purchases.
How the Clay Holder Is Made
The source describes a short sequence of craft steps, not a tested product or a reported commercial launch. The creator’s version begins with clay rolled into a piece about an inch thick, then bent into a hanging form with a projecting arm. The article also suggests a simple J shape with an upturned tip for anyone who does not want to make a cursive L.
Mounting can be planned while the clay is still wet: the report says a small dowel can be pushed through the top to leave a hole for a screw. Another option is to hang the finished piece from a wall hook. For renters, the article proposes a sturdy removable hook, while advising that any attachment be checked for security before use.
The supplied report does not provide measurements beyond the approximate clay thickness, identify a load rating, or describe controlled durability testing. It presents the project as a home craft idea and includes a disclosure that Hunker may earn a commission from purchases made through links. The available material does not establish that the design has been tested for long-term use.
“The creator shapes the clay into a looping form resembling a cursive capital “L.””
— Hunker’s report, describing @Sculpd’s YouTube tutorial
Durability and Wall Support Remain Untested
The source does not say whether the creator’s holder was tested over time, how much weight it can support, or how it performs in a humid bathroom. It also does not specify a clay brand, a final thickness, or a single mounting method that would work for every wall. Those details matter because the article itself warns of possible brittleness and says the attachment should be secure.
The report does not provide measurements for the finished piece or independent verification of its durability. A reader following the instructions would need to judge whether the holder is strong enough and whether the chosen hook is appropriate for the wall and the holder’s weight. The tutorial is a craft demonstration, not evidence that every version will hold up under regular use.
Check the Fit Before Hanging
The article describes no scheduled follow-up, product release or testing report. For someone attempting the project, the next steps are to check the holder’s fit with an empty tube before drying, allow the clay to dry fully, apply paint and a compatible clear finish, then mount it with a suitable hook or planned screw attachment.
Before putting a roll on the finished piece, Hunker advises confirming that it hangs securely and is within reach. The source does not offer a specific inspection schedule or repair method if the clay cracks, so readers should not assume that a decorative finish or removable hook makes a fragile holder safe for continued use.
Key Questions
What shape does the tutorial use for the toilet paper holder?
The featured design is a loose cursive L with a loop at the top for hanging and an open arm that supports the roll. Hunker also suggests a J shape with a gently upturned tip as an alternative.
How long should the clay dry before painting?
The report recommends letting the air-dry clay dry completely and gives 72 hours as the suggested drying period. It cautions against rushing the process because the piece could crack.
How can the holder be mounted?
Hunker describes hanging it from a wall hook, including a heavy-duty removable hook, or making a hole in the clay while it is wet so a screw can be used after it dries. The holder should be checked for security before a roll is added.
Is the clay holder proven to be durable?
The supplied report does not provide durability testing or a load rating. It warns that air-dry clay can be brittle, so the finished holder’s strength and attachment should not be assumed.
Source: hunker.com
